View Full Version : Mr. Pendlay
02-15-2009, 12:38 AM
Looking forward to a discussion with you sir.
02-15-2009, 01:38 AM
You can use the PM system if you only want to talk to Glenn Pendlay.
Regarding the hand repositioning, that can be done by popping the bar up as you come up from the front squat. This is also the best way to get the bar fully into your hands for the jerk (readjustment of some sort is usually necessary, it sounds like you will sometimes be needing more).
Here's an exaggerated example of such repositioning.
02-15-2009, 07:33 AM
This may or may not be helpful, but I'll add it.
My coach watched me clean and said I had enough flexibility that I should really try to keep close to a full grip on the bar into the rack position. I concentrated on doing so, and now I don't have a big open handed rack. I simply had to put my mind into it--I never thought to do it before.
If it is a flexibility issue in the rack, work on your thoracic extension mobility and wrist extension mobility.
02-15-2009, 08:32 AM
I dont have too much to add to the fingers coming off the bar thing, I think others have addressed this. In a nutshell, it seems to be a flexibility thing, which you can and should work to improve, you can also just work on keeping a good grip on the bar, John Thrush even advocates keeping the hook grip as you flip the elbows through to combat this...
As far as speed under the bar, in an ideal world, with no mental barriers, the bar doesnt have to be moving all that fast to get under it. Caleb has proved this to me several times... ive watched him complete lifts where it looked like he was in doubt of even deadlifting the bar, then boom hes under it. So I suppose I agree with Angel to some degree. Unfortunately, most will not go under a bar in these conditions, whether its possible or not.
Also, it does seem to have a lot to do with bar path/bar position... in "analysing" some of Calebs lifts compared to lifts by other lifters I have coached lifting similar weights who seemed to need a lot more bar speed, one difference is bar position and "balance" in the second pull position. so I do agree that proper placement of the bar in the second pull position has a lot to do with the amount of speed needed to complete the lift.
vBulletin v3.6.2, Copyright ©2000-2014, Jelsoft Enterprises Ltd.