Home   |   Contact   |   Help

Get Our Newsletter
Sign up for our free newsletter to get training tips and stay up to date on Catalyst Athletics, and get a FREE issue of the Performance Menu journal.

Go Back   Catalyst Athletics Forums > Training > Equipment

Reply
 
Thread Tools Display Modes
Old 05-21-2011, 12:46 PM   #1
Justin McCallon
New Member
 
Join Date: May 2009
Posts: 45
Default Bar, Weight, Rack Set, GHD, C2

So I'm trying to price out a home gym. I would like to buy:

600lbs of weight
Bar
GHD
Power rack
Rower
Surface

Weights:
I do a mix of powerlifting and weightlifting. My PR on Deadlift is 560 and I'm going to spend a lot of time trying to get that up to 600-620 or so. I like to drop at the top so I recover faster, so I need bumpers that are thin enough to fit 600lbs on the bar (could I use some metals and still drop it?). Yeah, I realize in a competition you need to guide it down, but it's not that hard to do so, it just means less deadlifts.
Weights that don't bounce all over the place are ideal. Some color would be nice, but I don't want to spend a fortune. I'll of course need some little metal plates. I'd prefer pound plates (but it's not a deal breaker).

Bar:
Something that can handle olympic weightlifting as well as a bailed squat that sits in the self-spot pins. I have a good Eleiko at my gym (Emory), and I really like the way it feels. Some of my "teammates" suggested Pendlay, and I think they spin really well, but I like the cheese-grater feel of the Eleikos. I have pretty tough hands and I don't like using straps. As long as the spin isn't terrible, I don't care that much. I'd prefer pound bars (but it's not a deal breaker). Ideally it should be able to handle a missed squat and be able to sit in the rack.

GHD:
We have the Powerlift GHD's at Emory and I love them. At CFAtlanta, they have an old Soronex GHD and I can't ever seem to get it set up right -- it just hurts my knees rather than hitting my hamstrings. I do actual glute-ham raises (as opposed to GHD back extensions, which I do only occasionally).

Rack:
I'm an unathletic pussy. I do low bar, wide stance, deep back squats, and I sit back a lot. I can't really bail. I'd like to get a power rack.
Really thin whole spacing, sturdy, self-spot pins, wide base. Olympic plate racks on the side would be nice. A pull-up bar that goes straight across without being too thin would be good. I'm 6'4 so I'd like it to be a tall rack so I don't hit my feet on pull-ups. Front rack and back rack would be good, and I'd like to have a bench.

Rower:
C2 Rower. Doesn't need to be the brand new kind, but not that old kind either. Gotta be a C2. The PM3 Concept D is fine.

Surface:
I was planning on putting all this in my garage. I don't want to spend an outrageous amount of money, but I'd like to lift on the best surface possible. Any ideas?


Any idea where I can get all this, shipped to Atlanta, for the best price (I realize I may need to go to different places)? Used is fine, except for the rower -- I don't want the chain all messed up or anything (unless that's fixable?). If it comes shipped and assembled that would be even better. Otherwise, I'll need to hire someone, because I suck. Thanks.
Justin McCallon is offline   Reply With Quote
Old 05-23-2011, 07:33 PM   #2
Patrick Donnelly
Senior Member
 
Patrick Donnelly's Avatar
 
Join Date: Aug 2007
Posts: 720
Default

I believe Pendlay sells black training bumpers in pounds - these are the competition thickness ones, but not calibrated to competition accurate weights (plus, they're in pounds, which is obviously not acceptable for competition). Check the MDUSA website for them.

Concept 2 sells replacement parts for their rowers online; I had to get a new bungee for my Model C when I bought it off Craig's List. The bungee only cost a couple of bucks, so I imagine other simple parts would be the same.
__________________
And yes, I'm actually holding that handstand. Get on my level.
Patrick Donnelly is offline   Reply With Quote
Old 07-16-2011, 03:13 PM   #3
Todd Rehm
New Member
 
Join Date: Aug 2008
Posts: 16
Default

Justin-

I wouldn't get caught up in a model D over a model C. I've owned both and prefer the model C. It's solid and if you get one for less money, you can always upgrade the handle, which is about $15 to the model D, and the PM2/2+ can be upgraded to the PM3/4 at your leisure.

If you look at the model Cs and Ds outside the weightroom, those Cs could easily be 15 years old, and they're still going strong.
Todd Rehm is offline   Reply With Quote
Old 07-16-2011, 06:58 PM   #4
Derek Weaver
Senior Member
 
Join Date: Nov 2007
Posts: 2,642
Default

Hey Justin,
For the surface, I would take the CF advice of looking for stall mats. You can probably get them cheap at a farming supply store if there is one in your area. Or you can build a lifting platform for fairly cheap if you find the plan online.

Regarding the rest of the equipment, all I can tell you is that if you can't find stuff on craigslist, then MDUSA is a good bet from a price standpoint. Rogue used to be good, but I don't know what their prices look like now. Elite FTS is pretty high priced on a lot of stuff.

Depending on what else you need, Perform Better has got some good stuff and their customer service is outstanding. I would get rehab type stuff from them if it ever comes to that.

edit:
crap, I just realized this thread is 2 + months old
__________________
Quote:
And if you don't think kettleball squat cleans are difficult, I say, step up to the med-ball
- CJ Kim
Derek Weaver is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 01:06 AM.

Powered by vBulletin Version 3.6.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Subscribe to our Newsletter


Receive emails with training tips, news updates, events info, sale notifications and more.
ASK GREG

Submit your question to be answered by Greg Everett in the Performance Menu or on the website

Submit Your Question
WEIGHTLIFTING TEAM

Catalyst Athletics is a USA Weightlifting team of competitive Olympic-style weightlifters with multiple national team medals.

Read More
Olympic Weightlifting Book
Catalyst Athletics
Contact Us
About
Help
Newsletter
Products & Services
Gym
Store
Seminars
Weightlifting Team
Performance Menu
Magazine Home
Subscriber Login
Issues
Articles
Workouts
About the Program
Workout Archives
Exercise Demos
Text Only
Instructional Content
Exercise Demos
Video Gallery
Free Articles
Free Recipes
Resources
Recommended Books & DVDs
Olympic Weightlifting Guide
Discussion Forum
Weight Conversion Calculator