Go Back   Catalyst Athletics Forums > Training > Equipment

Reply
 
Thread Tools Display Modes
Old 05-11-2011, 08:19 AM   #1
Chris Dunkin
New Member
 
Join Date: Jan 2011
Posts: 1
Default Need dimension's for reverse hyper DIY

Anyone have access to a reverse hyper? I'm making my own and would like a few dimensions. This is for my own use, not for sale. I've purchased the steel and necessary bearings.

1. distance from floor to center of bearing
2. length of the swinging arm
3. distance between the lateral base supports
Chris Dunkin is offline   Reply With Quote
Old 08-16-2011, 03:27 AM   #2
Peter Little
New Member
 
Join Date: Mar 2010
Posts: 8
Default Rhe

Chris-did you ever get an answer to your questions? Im on the same road and looking for suggestions as to where to get plans....
Peter Little is offline   Reply With Quote
Old 08-16-2011, 10:00 AM   #3
Matt Morris
Member
 
Join Date: Aug 2011
Location: Madison, Wi
Posts: 78
Default dimensions

The one I built, which has worked decently so far...has a 19" pendulum, which is about six inches below the table on which I lay my oversized gut. I'm a pretty short guy (5'8" w/ a 29 inch inseam). I also use a strap that adds about 6-8 inches of length (although not straight down from the pendulum, more sidways as I pull).

hope this helps.
Matt Morris is offline   Reply With Quote
Old 08-16-2011, 12:02 PM   #4
John Alston
Senior Member
 
Join Date: Jan 2007
Location: tidy bowl man's apt.
Posts: 1,121
Default

bet a lot of these dimensions can be based on the expected user.
__________________
"Morning, Putski eats it, noon, Putski eats it, night, Putski eats it. Putski loves!"
John Alston is offline   Reply With Quote
Old 09-27-2011, 02:43 PM   #5
michael campi
New Member
 
Join Date: Jan 2011
Posts: 8
Default

I found that a 20" plyo box and a 24" plyo box stacked one on the other works nicely. If you want to add weight duct tape some dumbells to your feet.
michael campi is offline   Reply With Quote
Old 09-29-2011, 07:13 AM   #6
Chris Rice
Member
 
Join Date: Jul 2007
Posts: 52
Default

You can get a good idea by looking at them on Louie's site but his are certainly wider than most will find necessary. But it's easy to modify for personal use, A big wide body kind of guy needs a wider setup - a taller guy will need a taller setup with a longer swing arm. The important things seem to be to get the axle as close to the hip hinge as possible and to make the base long enough from front to rear that it doesn't tip or walk across the floor when you use it.
Chris Rice is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -7. The time now is 11:08 AM.

Powered by vBulletin® Version 3.8.9 Beta 3
Copyright ©2000 - 2014, vBulletin Solutions, Inc.