Go Back   Olympic Weightlifting Forums - Catalyst Athletics > Olympic Weightlifting > General Olympic Weightlifting

Thread Tools Display Modes
Old 05-04-2007, 06:20 PM   #1
Rene Renteria
New Member
Join Date: Feb 2007
Posts: 17
Default Back Squat form help or suggestions

I posted this to the CF forum but am not getting many comments and would like to ask for some help here. If your form looked like this, what would you try to change?

Link to squat video (w/f s)


Iím looking for help with my form, particularly about that butt tuck I have at the bottom of the movement. Also whether my knees get too far forward, that sort of thing. I know that on the last couple of reps in the video I get a bit forward; Iím not very smooth in and out of the hole (no sniggering!). I'm also slow, both up and down.

I am wondering if my form is possibly or likely going to hurt my back. My pelvis tucks under at the bottom of my squat, which is only just below parallel. The tucking starts even before parallel. The depth in the video Iíve posted feels quite deep to me. (Itís not that deep, but thatís my perception when squatting.) In videos from the front, it seems that I do track my knees in line with my toes.

Should I be trying to increase the weight of my back squat even with these form issues? Would moving to front squats be better?

I have always been inflexible. I was doing CrossFit WODs somewhat to fairly regularly over the last couple of years and included OHS with PVC in most of my warmups, for example. But my squat ROM just does not seem to have improved. So if itís not working, I need to change something, right?

I have been doing a Starting Strength program recently, after a period of getting detrained (yet again!), to get my base strength up and then plan to add metcon back in once I reach some weight goals. Right now, Iím still barely at the ďNoviceĒ level in the book--weights for 3 sets of 5 reps: squat 190, power clean 135, bench press 150, press 85 (ugh), deadlift 265 (1 set of 5). (Iím 5í9Ē+ and between 155 and 160 lbs.; yes, Iím pretty weak.)

I now am using dynamic flexibility drills (from ďMagnificent MobilityĒ) as my warmup to see if that will help improve my ROM or at least make reaching my current ROM limits more easily. I need at least 95 lbs. on my back to force me down into the hole past parallel because of how tight I feel in the hips, hams, and ankles.

Any comments are much appreciated!

PS--Those are the TDS safety stands from New York Barbell. You can see that theyíre not very wide. I set up way to the back of them b/c I figure if I need to dump the bar, itíll be forward, not back. I havenít dumped yet.
Rene Renteria is offline   Reply With Quote
Old 05-04-2007, 07:52 PM   #2
Pierre Auge
Senior Member
Pierre Auge's Avatar
Join Date: Oct 2006
Posts: 522

OK here's what I see:

1. you engage the lift from the knee (on the way down) - you are low bar back squatting but letting the weight drive you down by pushing the knee forward rather then engaging by pushing your butt back!

2. your stance is too narrow - its hard to tell from the angle but I can almost guarantee that if you widen your stance by 2 inches and angle your toes out a bit more then you'd like too it will allow your pelvis track more efficiently.

3. You need to allow the hamstrings to engage - I'm betting you feel the vast majority of muscular tension in the quads when lifting. If you're front squatting or Olympic Back Squatting fine, that would be the point but you aren't you need to get stronger first.

4. The posterior tilt at the bottom of the movement will almost assuredly be solved by pushing your butt back some and letting yourself lean forward more. (folding at the hip) This is a posterior chain exercise and your doing it with your quads. This is also causing you to shift the weight onto the toes.

5. From the bottom you need to drive the hips up! - When you are in the hole you need to think of pushing up against your sacrum... Think of reaching for and sliding your ass up the wall behind you. This should be a life changing experience for you because you wont even notice the weight on your back at this point until it gets REALLY heavy. This is driven from the hammies...

6. lastly you need to DRIVE your knees out (apart) as you drive your hips up - this will engage the adducters, small muscles yes but important in the proper lifting of really heavy things!

Here are my cues for you -

Initiating the movement:
Plant your heels
Push your butt to the wall behind you

Getting out of the whole:
Slide your butt up the wall behind you!
Hips forward (to lock out)

Thats it! I mentioned that this would help correct the posterior tilt, let me explain why I think this. Because I see it all the time! Your posterior tilt comes from a strength imbalance between your front and your back, NOT A FLEXIBILITY ISSUE perse. The flexibility is there, your spinal errectors are not strong enough to keep your sacrum supported in place. Your hamstrings aren't even doing anything at this point. Your glutes are tight and the psoas is getting lazy. This is causing your pelvis to roll under (posterior tilt). You need to do something that will get all of the muscles doing what they are designed to do.

The torso muscles basically have one primary job - keeping your spine intact. Or as we CrossFitters like to say midline stability. (the swing arm of your crane) Get them strong doing this properly and it wont be an issue anymore. My posterior tilt vanished almost immediately after spending some time with Rip. I in turn have been teaching these things to others in far worse condition then you and they are doing just fine...

just for reference I weigh 150
(I'm not trying to show off I have far to go myself)
BS 280
FS - no idea
Bench 195
Press 135
Clean 200
Snatch 155
DL 322

I was where you are about 2 years ago. And only marginally better about 8 months ago since then my numbers have all jumped drastically! Technique is everything...

Do that and you will be good to go! No ifs ands or buts about it you'll do well!
NOTICE: Pierre Auge's opinions are subject to change at any time and without prior notice.

To give real service you must add something which cannot be bought or measured with money, and that is sincerity and integrity. - Douglas Adams
Pierre Auge is offline   Reply With Quote
Old 05-05-2007, 07:42 AM   #3
Chris Forbis
Senior Member
Join Date: Oct 2006
Location: Greenville, SC
Posts: 828

Great stuff in that post Pierre. I'm pretty sure I have similar problems to Rene so I tried following these tips today during my back squats. Seemed to help...
Chris Forbis is offline   Reply With Quote
Old 05-05-2007, 09:00 AM   #4
Robert Allison
Join Date: Jan 2007
Posts: 238

Nice post, Pierre.

I have had some problems with the back squat as well, and have been re-reading the section in SS that deals with the squat. Your thoughts seem very much in line with that, but helped me see some things a little more clearly, Good stuff.
Robert Allison is offline   Reply With Quote
Old 05-05-2007, 09:08 AM   #5
Robb Wolf
Senior Member
Robb Wolf's Avatar
Join Date: Oct 2006
Posts: 1,417

Great post Pierre. Not much to add. Rene, just think tight! and try to minimize "wiggle" during the movement. If you have read any of Pavels stuff emulate that full body tension.
"Survival will be neither to the strongest of the species, nor to the most intelligent, but to those most adaptable to change."
C. Darwin

Robb's Blog
Robb Wolf is offline   Reply With Quote
Old 05-05-2007, 09:10 AM   #6
Elliot Royce
Senior Member
Elliot Royce's Avatar
Join Date: Dec 2006
Posts: 317

I only recently realized what Pierre means by driving up with the hips. Basically I just think of moving the top of my butt straight up, and as he says, it's a very direct sensation of the hamstrings engaging.
Elliot Royce is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 09:45 AM.

Powered by vBulletin® Version 3.8.9 Beta 3
Copyright ©2000 - 2016, vBulletin Solutions, Inc.